PLC Logic Validator & Control System Diagnostician
Validate PLC logic, diagnose control failures, ensure safety compliance
What You Can Do
Analyze your PLC code and ladder logic to identify logic errors, safety violations, and inefficiencies before they reach production. You'll get detailed diagnostics of control system failures, safety compliance verification against IEC 61131 standards, and optimization recommendations for automation sequences. This skill helps you prevent costly downtime, ensure worker safety, and improve system performance across manufacturing operations.
Features
Analyze ladder logic, structured text, and function block diagrams to detect logical errors, infinite loops, race conditions, and improper timing sequences that could cause system failures.
Diagnose root causes of automation failures by analyzing error patterns, state machine behavior, sensor input sequences, and actuator response timing to pinpoint the source of unexpected shutdowns or erratic behavior.
Verify your control logic against IEC 61131-3, ISO 13849-1, and NFPA standards for emergency stop circuits, safe state handling, redundancy, and fault tolerance to ensure worker safety and regulatory compliance.
Review automation sequences for efficiency improvements, bottlenecks, and timing issues that slow production cycles or waste energy without sacrificing safety or quality.
Evaluate how changes to one controller affect interconnected systems, catch potential conflicts between independent logic sections, and identify cascade failure risks.
Receive clear, actionable remediation steps for every issue found, including code examples, configuration changes, and testing procedures you can implement immediately.
Examine communications protocols (Modbus, EtherCAT, PROFIBUS) and edge case handling where remote I/O modules communicate with central controllers to ensure robustness.
Example Output
Example 1: Logic Error Detection
Input: Your ladder logic for a packaging line conveyor system
Output:
- Critical Issue: Timer XIC before timer DN contact creates race condition
- Location: Rung 24, Motor_Advance section
- Risk: Motor may not stop properly if sensor triggers before timer expires
- Fix: Reverse logic to check timer DN before XIC; add 500ms delay on sensor input
Example 2: Safety Compliance Check
Input: Emergency stop circuit from your press controller
Output:
- Compliance Status: Partial (2/5 requirements met)
- Missing: Dual-channel E-stop input validation (IEC 61131-3 PLd)
- Missing: Safe state confirmation; system defaults to last-known state
- Recommendation: Add redundant E-stop inputs with diversified logic (1oo2D architecture)
- Impact: Upgrade from PLc to PLd safety rating
Example 3: Performance Bottleneck
Input: Pharmaceutical batch mix automation with 12-minute cycle time
Output:
- Analysis: Identified sequential delays totaling 3.2 minutes
- Bottleneck 1: Pump startup delay (500ms hardcoded) → reduce to 100ms
- Bottleneck 2: Valve settle-time logic runs serially → parallelize with concurrent states
- Optimization Target: 8.5-minute cycle (29% reduction)
- Safety Impact: All optimizations preserve E-stop response time (<100ms)
What's Included
- Logic Analysis Engine: Deep review of PLC code structure, control flow, state machines, and timing logic to identify errors before deployment.
- Failure Diagnostics: Root-cause analysis of automation failures including sensor race conditions, communication timeouts, and cascading faults.
- Safety & Compliance Audit: Verification against IEC 61131-3, ISO 13849-1 (PLd/PLe), NFPA, and industry-specific standards with remediation guidance.
- Remediation Roadmap: Prioritized list of fixes with code examples, implementation steps, and testing procedures organized by severity and risk.
- Performance Optimization Report: Identify inefficiencies, bottlenecks, timing improvements, and parallelization opportunities with cycle-time impact estimates.
- Integration Assessment: Analyze cross-system dependencies, communication protocols (Modbus, EtherCAT, PROFIBUS), and edge cases in networked control architectures.
Who It's For
- Controls Engineers
- Automation System Integrators
- Manufacturing Operations Managers
- Plant Safety & Compliance Officers
- Industrial Systems Maintenance Teams
Best For
- Pre-deployment PLC code review and validation
- Diagnosing and troubleshooting production line failures
- Safety compliance audits for regulatory certification
- Production cycle optimization and efficiency improvements
- Cross-system integration testing and impact analysis
You might also like
This skill systematically analyzes your product designs to identify manufacturability issues early, saving costly revisions and manufacturing delays. It evaluates geometry, material selection, tolerances, assembly feasibility, and production process constraints. You get actionable feedback on cost drivers, process risks, and design optimizations before committing to production.
by kody-w
You can submit tool designs—drawings, specifications, or descriptions—and Claude will evaluate manufacturability constraints, identify potential failure modes using structured frameworks, and recommend cost-reduction opportunities. You'll receive a prioritized report covering structural analysis, production feasibility, material efficiency, and design trade-offs.
by kody-w
You can automate the validation of clinical trial data against protocol specifications, identify discrepancies including missing values, out-of-range results, protocol violations, and CRF inconsistencies. The skill generates audit-ready query documentation, categorizes anomalies by severity and type, resolves root causes systematically, and produces FDA inspection-ready reports that trace every data decision and corrective action for CDISC and regulatory submission.
by kody-wThis skill interprets your FEA simulation results and extracts actionable design improvements. You can pinpoint stress concentrations, validate designs against safety factors and material limits, and receive specific geometry recommendations to reduce weight or improve performance. By automating FEA post-processing, you compress design iteration cycles and make engineering decisions faster.
by kody-w
You can validate eCRF and paper CRF datasets against protocol-defined rules, automatically identify data discrepancies (missing fields, out-of-range values, date inconsistencies), generate structured Data Query Forms (DQFs) for site clarification, track resolution status, and create audit-ready compliance documentation that meets FDA 21 CFR Part 11 and GCP requirements. This workflow reduces manual validation time while ensuring 100% traceability and regulatory readiness for inspections.
by kody-w
Get comprehensive PCB design analysis covering power delivery networks, signal integrity, thermal management, and manufacturing constraints. Claude identifies potential issues early and provides specific, actionable optimization recommendations to reduce cost, improve reliability, and accelerate time-to-market. Suitable for designs from initial concept through production-ready layouts.
by kody-w
You consolidate parallel data streams from preclinical toxicology studies (clinical pathology, histopathology, body weight changes, organ weights, clinical observations, mortality) into coherent regulatory-compliant narratives. This skill synthesizes findings across 6–12 endpoints simultaneously, identifies NOAEL/LOAEL with biological justification, determines safety margins, interprets species-specific or sex-specific signals, and produces Results & Discussion sections that satisfy FDA/EMA reviewers while supporting appropriate dosing decisions for IND-enabling studies.
by kody-w
You can analyze equipment sensors, operational logs, and historical maintenance data to predict failures weeks in advance. Claude generates actionable maintenance schedules, identifies high-risk assets, and calculates the financial impact of preventive vs. reactive maintenance. This skill transforms raw operational data into strategic maintenance decisions that minimize downtime and extend asset life.
by kody-w