PV System Design Optimizer
Design and optimize solar PV arrays with performance calculations and documentation
What You Can Do
Rapidly iterate through photovoltaic system design options by providing system parameters and constraints, then receive structured analysis of feasibility, expected performance, and engineering recommendations. The skill automates DC/AC sizing calculations, string configuration validation, equipment selection guidance, and preliminary shading analysis—enabling you to focus on site-specific engineering judgment while accelerating the design phase.
Features
validates optimal component combinations for performance and grid compliance
determines module arrangement, series/parallel topology, and voltage compliance checks
recommends combiner boxes, disconnects, grounding components, and balance-of-system sizing
produces structured equipment lists with specifications for procurement and installation
calculates expected output under different configurations and site conditions
evaluates basic shadow scenarios and quantifies system performance loss
checks interconnection voltage, frequency ride-through, and regulatory requirements
generates standardized technical reports and client presentation materials
Example Output
Example 1: Utility-Scale System Sizing
- Input: 2 MW system, 300W modules, 250V string voltage limit
- Output: DC size 2.4 MWdc, recommended inverter 2.1 MW, 8 strings × 25 modules per string, estimated first-year production 2,850 MWh, DC/AC ratio 1.14
Example 2: Distributed System Design
- Input: 25 kW rooftop system, 400W modules, +10° tilt, 15% partial shading
- Output: 63 modules, 3 inverters (8.8 kW each), estimated annual production 28,500 kWh, shading loss 8.2%, equipment list with part numbers and suppliers
Example 3: String Configuration Validation
- Input: 60-cell modules, -0.4%/°C temperature coefficient, tropical site conditions
- Output: Maximum string voltage 580V (safe margin), recommended series-parallel topology, thermal derating impact -12%, adjusted first-year production estimate
What's Included
- SKILL.md instruction file with design parameters, calculation workflows, and constraint definitions:
- PV System Design Questionnaire: template to capture site conditions, constraints, and performance targets
- DC/AC Sizing Calculation Framework: structured approach for inverter selection and string configuration validation
- Equipment Selection Checklist: balance-of-system components with sizing methodology
- Design Documentation Template: standardized report structure for technical specifications and client presentations
Who It's For
- Solar engineers designing utility-scale and distributed PV installations
- Renewable energy consultants evaluating system configurations for feasibility and performance
- PV project managers requiring rapid design iteration and technical documentation
- Electrical engineers validating DC/AC ratios and grid interconnection compliance
- Sales engineers preparing preliminary designs and cost estimates for client proposals
Best For
- Evaluating multiple inverter, module, and string configurations against performance targets
- Validating DC/AC ratios and determining optimal component sizing for specific sites
- Generating preliminary equipment bills of materials with specifications and procurement guidance
- Analyzing basic shading scenarios and quantifying performance impact on system design
- Creating standardized technical documentation and presentation materials for stakeholders
You might also like
You can diagnose mechanical faults (bearing wear, imbalance, misalignment), electrical issues (converter harmonics, magnetic suspension drift), and energy losses (windage, friction, core) in operational flywheel systems. This skill interprets vibration data, bearing temperature anomalies, and power output degradation to pinpoint root causes and recommend corrective actions. You'll optimize charge/discharge cycles, predict maintenance windows, and validate designs against grid compliance requirements.
by devsoul2026
You can rapidly prototype pumped hydro storage systems by performing gross head calculations from topographic data, optimizing reservoir dimensions for target storage durations, and selecting appropriately sized pump-turbine units. Claude guides you through penstock diameter optimization, validates operating points against IEC and IEEE standards, and generates preliminary civil works estimates and equipment specifications ready for stakeholder review or financing submissions.
by devsoul2026
You can use Claude to evaluate turbine placement concepts, quantify wake losses across layout scenarios, assess feasibility against site constraints, and identify optimization opportunities before detailed engineering. Claude helps you compare competing layouts, document design decisions, and troubleshoot yield predictions by analyzing wake interaction patterns and cost-benefit tradeoffs.
by devsoul2026
You can systematically analyze pumped hydro facility performance data to pinpoint efficiency losses, calculate head losses and mechanical degradation impacts, and generate prioritized maintenance and optimization recommendations. This skill synthesizes operational metrics, equipment specifications, and hydraulic calculations to quantify the financial impact of performance degradation and justify capital expenditures for modernization or intervention.
by devsoul2026
You can conduct rigorous structural load analyses for wind turbines by working through a systematic methodology that covers load identification, load case matrix development, fatigue damage calculations, and load combination verification. Claude helps you quantify aerodynamic, gravitational, operational, and environmental loads, then combines them into critical scenarios for design validation and certification audits.
by devsoul2026
You can develop complete wellbore architecture designs for geothermal fields by integrating formation characteristics, drilling constraints, and production objectives. The skill guides you through casing program optimization, deviated well planning, high-temperature environment design, and trade-off analysis to balance thermal access against drilling cost and risk—critical for wells operating 20-50+ years in demanding subsurface conditions.
by devsoul2026
You can rapidly generate optimized PV system designs that synthesize site characteristics, equipment specifications, electrical standards, and performance requirements into actionable array layouts and electrical configurations. This skill accelerates design iteration by systematically evaluating competing constraints—energy capture maximization, electrical loss minimization, grid code compliance, thermal management, and cost optimization—without replacing professional engineering judgment, ensuring designs align with industry best practices.
by devsoul2026
You can design robust geothermal wellbores that withstand extreme thermal gradients, high-temperature steam zones, and corrosive geothermal fluids over multi-decade production lifecycles. This skill guides you through modeling accurate temperature profiles, selecting thermally-stable casing programs, choosing drilling fluids for elevated temperatures, and calculating pressure regimes that account for hydrostatic, lithostatic, and thermal stresses. The result is engineered wellbore designs that maximize resource contact while maintaining long-term integrity and regulatory compliance.
by devsoul2026