Composite Layup Analysis & Failure Prediction
Analyze composite laminates and predict failure modes using Classical Lamination Theory
What You Can Do
You input ply orientations, material properties, and loading conditions, and Claude applies Classical Lamination Theory to calculate effective stiffness matrices, stress/strain distributions across each ply, and evaluate multiple failure criteria simultaneously. This enables you to screen composite layup candidates, optimize stacking sequences, and identify critical failure modes in minutes—without manual hand calculations or expensive FEA preprocessing. You get actionable design feedback, sensitivity analysis, and documentation-ready output for design reports.
Features
Example Output
Example 1: Carbon/Epoxy Tube Layup Analysis
Input: [0/±45/90]s quasi-isotropic laminate, 8 plies, 0.125 mm each, 500 N axial + 100 N·m torque
Output:
Effective Laminate Properties:
- Ex = 58.2 GPa | Ey = 58.1 GPa | νxy = 0.32
- Gxy = 4.1 GPa | Bending stiffness preserved (B matrix ≈ 0)
Critical Ply: 90° plies
- Transverse stress σyy = 42.3 MPa (exceeds matrix strength)
- Max strain criterion: FPF load = 480 N (governs)
- Tsai-Wu failure index: 1.08 (critical)
- Margin of Safety: -7.8% (design change recommended)
Optimization Path: Increase ±45° content to 50% → FPF improves to 612 N
Example 2: Sandwich Panel Face Sheet Screening
Input: Glass/Polyester [0/90/0]s facing (3 plies per side), 75 kPa pressure loading
Output:
Failure Mode: Matrix-dominated transverse cracking at 91 kPa
- Tsai-Wu index at 75 kPa = 0.82 (safe)
- Margin = 21.3%
- Recommendation: Current design acceptable; ply angle sensitivity minimal
What's Included
- SKILL.md instruction file with CLT formulations and failure criterion reference:
- Laminate Input Template (CSV format: ply angle, thickness, material grade):
- Material Property Database (common aerospace composites: AS4/3506, IM7/8552, E-glass/epoxy):
- Failure Criteria Checklists (Maximum Stress, Maximum Strain, Tsai-Wu, Hoffman—when to apply each):
- Design Optimization Workflow (sensitivity analysis template, trade-study matrix for stacking sequences):
Who It's For
- Aerospace structural engineers designing composite wings, fuselages, and control surfaces
- Materials engineers evaluating composite layup performance against airworthiness requirements
- Design engineers screening preliminary concepts before FEA investment
- Stress analysts supporting trade studies and design-for-manufacturability assessments
- Certification engineers documenting laminate properties for type approval packages
Best For
- Preliminary composite layup design and feasibility screening during concept phase
- Multi-candidate stacking sequence ranking before detailed FEA analysis
- Ply-level failure mode prediction and critical load identification
- Laminate property sensitivity analysis (fiber angle, thickness, material variations)
- Troubleshooting unexpected test failures and validating design margins
- Training engineers on laminate mechanics fundamentals and CLT applications
You might also like
You can organize complex avionics system architecture, conduct structured Failure Mode and Effects Analysis (FMEA) across federated and integrated architectures, generate certification-ready compliance matrices, and identify design gaps against regulatory standards. Claude synthesizes requirements across documents, traces functional decomposition hierarchies, evaluates criticality assignments, and structures verification evidence to reduce design verification timeline by 30-40%.
by a7garden
You can perform quick thermodynamic calculations from engine test data, analyze off-design operating points and surge margins, diagnose failure modes from symptom data, interpret compressor maps, and optimize thermodynamic cycles for mission profiles. This skill lets you validate assumptions, identify efficiency loss root causes, and narrow investigation scope—enabling faster problem-solving than manual spreadsheet work while complementing detailed CFD and design tools.
by a7garden
You can decompose complex avionics test failures across flight control computers, inertial measurement units, air data computers, and bus networks (ARINC 429, CAN, AFDX). The skill helps you distinguish genuine system defects from test configuration errors, measurement anomalies, and environmental artifacts—then produce failure reports with root cause confidence metrics and corrective action prioritization that satisfy both engineering rigor and aerospace certification requirements (DO-178C, DO-254, TSO standards).
by a7garden
You can systematically map dependencies between dozens of subsystems, visualize integration relationships through structured dependency matrices, quantify integration risk exposure, and generate optimal integration sequences that minimize schedule risk. This skill understands aerospace-specific challenges like avionics coupling, power distribution constraints, thermal interdependencies, and certification requirements—transforming interface specifications into actionable integration plans before hardware arrives.
by a7garden
You can analyze complex avionics test failures by feeding Claude multiple data streams—oscilloscope traces, BITE logs, CAN/ARINC 429 transcripts, and environmental parameters—to build diagnostic decision trees that prioritize root causes based on failure signatures. Claude helps you cross-reference specifications against observed behavior, identify design-versus-implementation gaps, and generate testable hypotheses with step-by-step verification procedures that accelerate failure resolution across multi-LRU (Line Replaceable Unit) systems.
by a7garden
You can systematically break down complex top-level system requirements into lower-level functional, performance, interface, and constraint requirements allocated to subsystems and components. Claude generates comprehensive traceability matrices that link customer requirements to derived requirements to verification methods, while automatically identifying conflicts, ambiguities, and infeasibilities before design begins—ensuring your requirements documentation is audit-ready for certification.
by a7garden
You can systematically diagnose avionics system failures by organizing failure symptoms into decision frameworks that consider hardware, software, and environmental factors simultaneously. The skill generates failure logic trees, maps cross-system dependencies, and produces defensible root cause analysis reports that meet FAA/EASA certification requirements. This transforms ad-hoc troubleshooting into a repeatable, auditable methodology that accelerates fault isolation and supports occurrence reporting.
by a7garden
You can master professional podcast audio editing, mixing, and mastering workflows using Audacity with Claude-guided processes that transform raw recordings into broadcast-quality episodes. Claude provides step-by-step instructions for noise reduction, multi-track mixing, dynamic range control, and mastering optimization tailored to your podcast's mic setup and distribution requirements. Automate repetitive editing tasks and achieve consistent audio quality across entire episode catalogs.
by a7garden